EN 10025-2 S235JR H beam steel is a kind of low-carbon, Hot-Rolled Structural Steel, which EN 10025-2 S235JR H beam steel is widely used in the production of cold-formed hollow section. The low yield point and low chemical level of the material are ideal for processing and easy forming, and cold formed sections may be distorted when galvanized.
EN 10025-2 S235JR H beam steel chemical composition
| Grade |
C |
Si max |
Mn max |
P max |
S max |
N max |
Cu max |
|
≤16 |
16-40 |
>40 |
|
S235JR |
0.17 |
0.17 |
0.20 |
- |
1.40 |
0.035 |
0.035 |
0.012 |
0.55 |
EN 10025-2 S235JR H beam steel yield strength
| Grade |
Yield strength Mpa |
|
≤16 |
16-40 |
40-63 |
63-80 |
80-100 |
100-150 |
150-200 |
200-250 |
250-400 |
|
S235JR |
235 |
225 |
215 |
215 |
215 |
195 |
185 |
175 |
- |
EN 10025-2 S235JR H beam steel tensile strength
| Grade |
Tensile strength Mpa |
|
≤3 |
3-100 |
100-150 |
150-250 |
250-400 |
|
S235JR |
360-510 |
360-510 |
350-500 |
340-490 |
- |
EN 10025-2 S235JR H beam steel has higher ratio of flange width to web height than ordinary I-beam, reasonable interface distribution and good section mechanical properties. Our company adopts hot-rolled EN 10025-2 S235JR H beam steel, which has the advantages of light weight, fast construction speed, good seismic performance, energy saving and consumption reduction.
If you are interested in EN 10025-2 S235JR H beam steel, please contact us. We can provide high quality and good service of EN 10025-2 S235JR H beam steel. Of course, we have different sizes of EN 10025-2 S235JR H beam steel to meet any of your requirements.
